Boon Whale Pod Bath Toy Scoop Drain and Storage Description
- Removable Scoop Makes Bath Time Clean-Up Fun And Easy
- Stores And Organizes Bath Accessories
- Wall-Mounted Base With Build-In Shelf
- Helps Reduce Mold And Mildew Build-Up On Toys
- Mounting Options Included: Adhesive Strips And Hardware
- Recommended Age: ADULT
- Made Without BPA Or PVC
- Dimensions: 16.5″ x 9.5″ x 6.5″
NO MORE BLUBBERING
Ready to shoot messy bath toys out your blowhole? WHALE POD scoops up everything for easy rinsing then stores on your shower wall. It even includes a built-in shelf for stuff like shampoo and bubble bath.
Whale watching binoculars not included.
Remove Whale Pod base from the wall bracket by first holding the bracket securely in place on the wall, then pulling the base up and off the bracket tabs. Clean base and scoop with warn water and mild soap.
How do the Frog and Whale Pods attach to the wall?
The Frog Pod and the Whale Pod both attach to the bathtub wall with either super-strong adhesive strips or screws. You may choose which option to use. We also offer a suction cup option as well as a silicone adhesive option, both sold separately.
How much weight will the Frog and Whale Pods hold?
The amount of weight the Frog Pod or Whale Pod can hold varies, depending on the mounting option used. The adhesive strip option will hold up to 10 pounds of toys and accessories and the screw-mounting option will hold up to 20 pounds. The suction cup option will hold up to 5 pounds and the silicone adhesive option will hold up to 10 pounds.
What kind of adhesive is used on the Frog and Whale Pods?
The Frog & Whale Pods come with four super-strong adhesive strips already attached to the wall bracket. This unique adhesive creates a semi-permanent bond that will withstand moisture. The adhesive can be removed and will not leave any residue on wall surfaces.
Are there any surfaces that should be avoided when using the adhesive strips?
The adhesive will not stick to silicone tile, estimated to be 2-3% of all household tile. When using either the adhesive strips or the suction cups, avoid surfaces that are textured, pebbled, or uneven, as well as surfaces with very small tiles. It is also important to avoid mounting the Frog Pod or Whale Pod on a curved surface, such as in the corners of fiberglass showers.
Can the adhesive strips on the mounting bracket be reused if my Frog or Whale pod is removed from the wall?
No, the adhesive strips are meant for one-time use only. When the adhesive is first attached, a chemical bond is created and removing the adhesive breaks this bond. Replacement adhesive strips can be purchased from our online store.
How long do I have to wait after mounting the Frog or Whale Pod before using the tub or shower?
Leave the mounting bracket hanging by itself for 24 hours. During this time, avoid moisture and the use of cleaning chemicals near the bracket. Avoid putting unnecessary pressure on the bracket for the first 72 hours. After this time, the semi-permanent bond will be thoroughly set and the Frog Pod or Whale Pod will be ready for regular use.
How should I prepare my wall surface before mounting the bracket with the adhesive strips or the suction cups?
The surface must be thoroughly cleaned and dry before attaching either the adhesive strips or the suction cups. First, use a bathroom cleaner to remove all dirt and residue from the surface. Be sure to rinse all cleaner residue from the surface as well. Next, use rubbing alcohol (without emollients) to wipe the surface and let dry thoroughly before attaching the bracket.
Will temperature affect the quality of the adhesive bond?
The adhesive requires that the initial bond be created on a wall surface that is above 70 degrees Fahrenheit. Ideally, the wall temperature should remain above 70 degrees Fahrenheit for the initial 24 hour period.
Will hard water deposits affect the quality of the adhesive bond?
It is best to avoid areas of the shower/tub surface where there could be hard water deposits because the adhesive may not stick to these surfaces. If you do have hard water, we recommend using a cleaner made specifically for removing hard water deposits before using alcohol to wipe the mounting surface.
How do I remove the adhesive strip mounting bracket?
To remove the adhesive strip mounting bracket, use a flat object, such as a screwdriver or a butter knife (covered with a soft cloth to avoid scratching the wall surface), to pry up the corner of one adhesive strip. The remaining adhesive strips can then be released from the wall (with a bit of elbow grease!) After loosening the first strips, rotate the bracket to release the remaining strips. Any adhesive remaining on the wall can be easily pulled off.
If I decide to move my Frog or Whale Pod, can I get replacement adhesive strips to re-hang it?
Replacement adhesive strips can be purchased from our online store.
Do you have any suggestions to help ensure a good bond when using the adhesive strips?
It is very important that you place the bracket onto the wall in its proper position only once. After it is placed on the wall, do not try to remove and reposition it as this will prevent the adhesive strips from adhering to the wall.
To attach the bracket to the bathtub/shower wall, select an area where strips are touching the least amount of grout. It is important to maintain a wall surface temperature above 70 degrees Fahrenheit from the time you first place the bracket onto the wall and throughout the entire 24 hour period before attaching the base. If you are mounting the bracket on an exterior wall during cold weather, it may be necessary to increase the room temperature during this time.
When placing the bracket onto the cleaned wall surface, use your thumb to press firmly over each of the adhesive strips. Rub while pressing to remove any air bubbles between the adhesive strips and wall surface. If adhesive strips cross grout lines, be sure to firmly press adhesive into recessed areas.
aDHESIVE PARTS
ADHESIVE STRIP WALL BRACKET
ADHESIVE STRIP KIT
